This connection kit is suitable for water heaters with 1/2” external thread connections and is ideal for setups involving a 15 mm cold water pipe and a nearby sink waste pipe (Ø40 mm PVC).
With this connection kit, you are assured of a safe, reliable and straightforward installation for your water heater. All components required for a standard installation are included, allowing you to begin work immediately.

Box Contents

• High-pressure water hose, 0.5 m, 10 mm clamp – 1/2” union nut*

• High-pressure water hose, 0.5 m, 10 mm clamp – Ø15 pipe

• High-pressure water hose, 0.5 m, Ø15 pipe – 1/2” union nut*

• Copper pipe, Ø15, length 50 mm

• Pressure Relief Release Valve, with a 360 degrees rotable tundish (funnel), Inlet combination DN15, 15 mm compression fitting, pressure rating: 6 bar, 1/2” male thread (Potable Water 1/2″ MBSP x 15mm)

• Brass T-piece, 3 x 15 mm compression fitting

• Flexible plastic hose

• Reducer to funnel

• Tie wrap

• Plastic T-piece, 40 x 40 x 40 mm, including adaptor*

• 2 fibre rings included for 1/2” flat couplings

The following standard setup is assumed:

• A 15 mm cold water pipe leading to the clamp connection of the inlet combination.

• A sink waste pipe (Ø40 mm PVC) located directly adjacent to the water heater.

• Water heater connections with 1/2” male thread. 

• Potable Water 1/2″ MBSP x 15mm.

The safety valve for ELDOM water heaters is an essential component designed to perform three critical functions:

1. Overpressure Relief Valve:
   Maintains safe internal pressure levels by preventing excess buildup, thereby protecting the water heater and connected piping from damage.

2. Drain Valve:
   Enables controlled release of excess water or pressure during maintenance or system adjustments, ensuring safe operation.

3. Check Valve:
   Blocks backflow of water into the water heater, preventing contamination of the freshwater supply.

Key Features:

• CE Certified: Compliant with EU safety standards.

• Durable Construction: Built for reliability under high-pressure conditions.

• Multi-Functional Design: Combines three safety mechanisms in one compact unit.

Ideal For:

• ELDOMl water heater systems requiring pressure regulation.

• Maintenance procedures demanding safe drainage capabilities.

• Ensuring hygienic water supply by preventing backflow contamination.

The safety valve for Thermex Digital water heaters is an essential component designed to perform three critical functions:

1. Overpressure Relief Valve:
   Maintains safe internal pressure levels by preventing excess buildup, thereby protecting the water heater and connected piping from damage.

2. Drain Valve:
   Enables controlled release of excess water or pressure during maintenance or system adjustments, ensuring safe operation.

3. Check Valve:
   Blocks backflow of water into the water heater, preventing contamination of the freshwater supply.

Key Features:

• CE Certified: Compliant with EU safety standards.

• Durable Construction: Built for reliability under high-pressure conditions.

• Multi-Functional Design: Combines three safety mechanisms in one compact unit.

Ideal For:

• Thermex Digital water heater systems requiring pressure regulation.

• Maintenance procedures demanding safe drainage capabilities.

• Ensuring hygienic water supply by preventing backflow contamination.

The safety valve for Thermex and TTulpe Digital water heaters is an essential component designed to perform three critical functions:

1. Overpressure Relief Valve:
   Maintains safe internal pressure levels by preventing excess buildup, thereby protecting the water heater and connected piping from damage.

2. Drain Valve:
   Enables controlled release of excess water or pressure during maintenance or system adjustments, ensuring safe operation.

3. Check Valve:
   Blocks backflow of water into the water heater, preventing contamination of the freshwater supply.

Key Features:

• CE Certified: Compliant with EU safety standards.

• Durable Construction: Built for reliability under high-pressure conditions.

• Multi-Functional Design: Combines three safety mechanisms in one compact unit.

Ideal For:

• TTulpe Digital water heater systems requiring pressure regulation.

• Maintenance procedures demanding safe drainage capabilities.

• Ensuring hygienic water supply by preventing backflow contamination.

Anode for your ELDOM 50-80-100-120- liter

Anode rod is there for the protection of the boiler and the heating element.

The anode rod has a length of 31.5 cm and a diameter of 20 mm. Thread M6.

The Anode is located on the inside of the tank attached to the heating element.

Suitable for the models:

50 liters Favourite and Spectra

80 liters Favourite and Spectra

100 liters Favourite and Spectra

120 liters Favourite and Spectra

Anode for your ELDOM 7-10-15-30 liter

Anode rod is there for the protection of the boiler and the heating element.

The anode rod has a length of 16.5 cm and a diameter of 24 mm. Thread M6.

The Anode is located on the inside of the tank attached to the heating element.

Available for the models:

7 liter NMP/PMP

10 liter NMP/PMP

15 liter NMP/PMP

30 liter Favourite

Thermex Anode

Size : 18x130 MM

Thread : 6 MM

Diameter heating element flange : Ø 64 MM

Suitable for the models

THERMEX IF 30V PRO WIFI

THERMEX IF 50V PRO WIFI

THERMEX IF 80V PRO WIFI

THERMEX IF 50H PRO WIFI

THERMEX IF 30V PRO WIFI

THERMEX ID 30V SMART WIFI

THERMEX ID 50H SMART WIFI

THERMEX ID 50H SMART WIFI

THERMEX ID 50H SMART WIFI

THERMEX ID 80H SMART WIFI

THERMEX ESS THERMO 30 V

THERMEX ESS THERMO 50 V

Suitable for the models up to mid-2019

IF 30 V PRO with a Ø 64 flange

IF 50 V PRO with a Ø 64 flange

IF 80 V PRO with a Ø 64 flange

IF 50 H PRO with a Ø 64 flange

IF 80 H PRO with a Ø 64 flange

Suitable for models up to 2020

IF 30 SMART with a Ø 64 flange

IF 50 SMART with a Ø 64 flange

IF 80 SMART with a Ø 64 flange

In case you have a Ø 92 flange, the 24x170 m6 ANODE fits your boiler.

Look on our site under Thermex parts to find the right anode for you.

TTulpe Anode

Size : 22x165 MM

Thread : 6 MM

Suitable for the models

TTulpe smart master 60

TTulpe smart master 80

TTulpe smart master 100

TTulpe heating element 1200 watt

Element type : Vertical-Horizontal

Available for the models:

TTulpe smart master 60

TTulpe smart master 80

TTulpe smart master 100

Thermex heating element 1300 watt

_{element type : Vertical}

_{flange size : Ø 92 MM}

Available for the models:

IF Comfort 30 V

IF Comfort 50 V

IF Comfort 80 V

IF Shadow 30 V

IF Shadow 50 V

IF Shadow 80 V