Boilers
Electric Boilers: Efficient, Eco-Friendly Heating
Discover high-efficiency electric boilers at Quality Heating – the sustainable solution for modern homes. Ideal for properties without gas connections or off-grid locations, our boilers deliver 100% efficient heating with zero emissions and near-silent operation.
Key Benefits:
Carbon-neutral heating for eco-conscious households
Compact & flue-free design – no fuel storage or chimney required
Seamless integration with solar PV or heat pumps
Low-maintenance and safer than combustion systems
Compatible with combi, system, and heat-only setups
Upgrade to clean, reliable electric heating with UK-leading models. Free delivery available.
Heating Solutions You Can Trust
EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.
For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
SlimJim Electric Flow Boiler Space-Saving Heating Solution
Compact Size Designed to maximize cupboard/closet space for installations where space is limited.
Output Range Single phase outputs:
- 4kW, 7kW, 10kW, 12kW
- 14.4kW model for larger property needs
- Flexible Configuration Can be used for heating only or combined heating & hot water via ‘S’ plan system.
User-Friendly Controls
- Front control panel with temperature adjustment dial
- Heat mode and fault diagnostic indicators
Advanced Features
- 100% energy efficiency
- Virtually silent operation
- Run-dry sensor protects heat exchanger
- High temperature safety cut-out
Quality Components
- Fully insulated stainless steel heat exchanger
- Easy access front cover for maintenance
Temperature Range Adjustable from 30°C to 80°C for wet system radiators and underfloor heating.
Installation Versatility Available as standalone boiler or with heating/hot water packs for complete solutions.
With its slimline dimensions yet powerful output, the SlimJim provides high-efficiency space heating in a compact, versatile, and easy-to-use package.
The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.
The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.
The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.
Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.
The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.
SlimJim Electric Flow Boiler Space-Saving Heating Solution
Compact Size Designed to maximize cupboard/closet space for installations where space is limited.
Output Range Single phase outputs:
- 4kW, 7kW, 10kW, 12kW
- 14.4kW model for larger property needs
- Flexible Configuration Can be used for heating only or combined heating & hot water via ‘S’ plan system.
User-Friendly Controls
- Front control panel with temperature adjustment dial
- Heat mode and fault diagnostic indicators
Advanced Features
- 100% energy efficiency
- Virtually silent operation
- Run-dry sensor protects heat exchanger
- High temperature safety cut-out
Quality Components
- Fully insulated stainless steel heat exchanger
- Easy access front cover for maintenance
Temperature Range Adjustable from 30°C to 80°C for wet system radiators and underfloor heating.
Installation Versatility Available as standalone boiler or with heating/hot water packs for complete solutions.
With its slimline dimensions yet powerful output, the SlimJim provides high-efficiency space heating in a compact, versatile, and easy-to-use package.
The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.
The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.
The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.
Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.
The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.
SlimJim Electric Flow Boiler Space-Saving Heating Solution
Compact Size Designed to maximize cupboard/closet space for installations where space is limited.
Output Range Single phase outputs:
- 4kW, 7kW, 10kW, 12kW
- 14.4kW model for larger property needs
- Flexible Configuration Can be used for heating only or combined heating & hot water via ‘S’ plan system.
User-Friendly Controls
- Front control panel with temperature adjustment dial
- Heat mode and fault diagnostic indicators
Advanced Features
- 100% energy efficiency
- Virtually silent operation
- Run-dry sensor protects heat exchanger
- High temperature safety cut-out
Quality Components
- Fully insulated stainless steel heat exchanger
- Easy access front cover for maintenance
Temperature Range Adjustable from 30°C to 80°C for wet system radiators and underfloor heating.
Installation Versatility Available as standalone boiler or with heating/hot water packs for complete solutions.
With its slimline dimensions yet powerful output, the SlimJim provides high-efficiency space heating in a compact, versatile, and easy-to-use package.
The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.
The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.
The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.
Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.
The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.
SlimJim Electric Flow Boiler Space-Saving Heating Solution
Compact Size Designed to maximize cupboard/closet space for installations where space is limited.
Output Range Single phase outputs:
- 4kW, 7kW, 10kW, 12kW
- 14.4kW model for larger property needs
- Flexible Configuration Can be used for heating only or combined heating & hot water via ‘S’ plan system.
User-Friendly Controls
- Front control panel with temperature adjustment dial
- Heat mode and fault diagnostic indicators
Advanced Features
- 100% energy efficiency
- Virtually silent operation
- Run-dry sensor protects heat exchanger
- High temperature safety cut-out
Quality Components
- Fully insulated stainless steel heat exchanger
- Easy access front cover for maintenance
Temperature Range Adjustable from 30°C to 80°C for wet system radiators and underfloor heating.
Installation Versatility Available as standalone boiler or with heating/hot water packs for complete solutions.
With its slimline dimensions yet powerful output, the SlimJim provides high-efficiency space heating in a compact, versatile, and easy-to-use package.
The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.
The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.
The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.
Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.
The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.
SlimJim Electric Flow Boiler Space-Saving Heating Solution
Compact Size Designed to maximize cupboard/closet space for installations where space is limited.
Output Range Single phase outputs:
- 4kW, 7kW, 10kW, 12kW
- 14.4kW model for larger property needs
- Flexible Configuration Can be used for heating only or combined heating & hot water via ‘S’ plan system.
User-Friendly Controls
- Front control panel with temperature adjustment dial
- Heat mode and fault diagnostic indicators
Advanced Features
- 100% energy efficiency
- Virtually silent operation
- Run-dry sensor protects heat exchanger
- High temperature safety cut-out
Quality Components
- Fully insulated stainless steel heat exchanger
- Easy access front cover for maintenance
Temperature Range Adjustable from 30°C to 80°C for wet system radiators and underfloor heating.
Installation Versatility Available as standalone boiler or with heating/hot water packs for complete solutions.
With its slimline dimensions yet powerful output, the SlimJim provides high-efficiency space heating in a compact, versatile, and easy-to-use package.
The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.
The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.
The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.
Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.
The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.
SlimJim Electric Flow Boiler Space-Saving Heating Solution
Compact Size Designed to maximize cupboard/closet space for installations where space is limited.
Output Range Single phase outputs:
- 4kW, 7kW, 10kW, 12kW
- 14.4kW model for larger property needs
- Flexible Configuration Can be used for heating only or combined heating & hot water via ‘S’ plan system.
User-Friendly Controls
- Front control panel with temperature adjustment dial
- Heat mode and fault diagnostic indicators
Advanced Features
- 100% energy efficiency
- Virtually silent operation
- Run-dry sensor protects heat exchanger
- High temperature safety cut-out
Quality Components
- Fully insulated stainless steel heat exchanger
- Easy access front cover for maintenance
Temperature Range Adjustable from 30°C to 80°C for wet system radiators and underfloor heating.
Installation Versatility Available as standalone boiler or with heating/hot water packs for complete solutions.
With its slimline dimensions yet powerful output, the SlimJim provides high-efficiency space heating in a compact, versatile, and easy-to-use package.
The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.
The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.
The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.
Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.
The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.
The Single Boiler Pack is designed to accompany the SlimJim Flow Boiler to achieve a heat only system installation.
The pack includes the following components:
- 1x Single Channel Programmer (EC10001)
- 1x Room Thermostat (EC10012)
- 1x Auto Air Vent (EC10005)
- 1x Grundfos UPM3 Pump (EC10006/A)
- 2x Pump Valve (EC10007)
- 1x 8 Ltr Robo Kit (EC10004)
- 1x Twin Channel Programmer (EC10002)
- 1x Room Thermostat (EC10012)
- 1x Auto Air Vent (EC10005)
- 1x Grundfos Pump (EC10006/A)
- 2x Pump Valve (EC10007)
- 1x 8 Ltr Robo Kit (EC10004)
- 1x Wiring Centre (EC10010)
- 2x 22mm 2 Port Zone Valve (EC10008)
- 1x Auto Bypass
Neptune Direct Unvented Cylinders
Direct hot water cylinders for electric water heating, designed with quality and performance in mind, ranging from 120 to 300 litres capacity
The Neptune Range of Direct Unvented Hot Water Cylinders have been designed to accommodate properties where external heat sources are not available. Our range of Direct Hot Water Cylinders operate using electricity which powers two inbuilt 3kW Immersion Heaters. When there are no external heat sources available, the Neptune range is a perfect solution.
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Direct Unvented Cylinders
Direct hot water cylinders for electric water heating, designed with quality and performance in mind, ranging from 120 to 300 litres capacity
The Neptune Range of Direct Unvented Hot Water Cylinders have been designed to accommodate properties where external heat sources are not available. Our range of Direct Hot Water Cylinders operate using electricity which powers two inbuilt 3kW Immersion Heaters. When there are no external heat sources available, the Neptune range is a perfect solution.
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Direct Unvented Cylinders
Direct hot water cylinders for electric water heating, designed with quality and performance in mind, ranging from 120 to 300 litres capacity
The Neptune Range of Direct Unvented Hot Water Cylinders have been designed to accommodate properties where external heat sources are not available. Our range of Direct Hot Water Cylinders operate using electricity which powers two inbuilt 3kW Immersion Heaters. When there are no external heat sources available, the Neptune range is a perfect solution.
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Direct Unvented Cylinders
Direct hot water cylinders for electric water heating, designed with quality and performance in mind, ranging from 120 to 300 litres capacity
The Neptune Range of Direct Unvented Hot Water Cylinders have been designed to accommodate properties where external heat sources are not available. Our range of Direct Hot Water Cylinders operate using electricity which powers two inbuilt 3kW Immersion Heaters. When there are no external heat sources available, the Neptune range is a perfect solution.
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Direct Unvented Cylinders
Direct hot water cylinders for electric water heating, designed with quality and performance in mind, ranging from 120 to 300 litres capacity
The Neptune Range of Direct Unvented Hot Water Cylinders have been designed to accommodate properties where external heat sources are not available. Our range of Direct Hot Water Cylinders operate using electricity which powers two inbuilt 3kW Immersion Heaters. When there are no external heat sources available, the Neptune range is a perfect solution.
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Indirect Unvented Cylinders
Ranging from 120 to 300 litres capacity, our premium indirect hot water cylinders with outstanding efficiency ratings
The Neptune Range of the Indirect Unvented Hot Water Cylinders are built to work in combination with any external thermostatically controlled heat source. Within this industry leading Hot Water Storage Cylinders is a highly efficient 3kW Immersion Heater
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Indirect Unvented Cylinders
Ranging from 120 to 300 litres capacity, our premium indirect hot water cylinders with outstanding efficiency ratings
The Neptune Range of the Indirect Unvented Hot Water Cylinders are built to work in combination with any external thermostatically controlled heat source. Within this industry leading Hot Water Storage Cylinders is a highly efficient 3kW Immersion Heater
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Indirect Unvented Cylinders
Ranging from 120 to 300 litres capacity, our premium indirect hot water cylinders with outstanding efficiency ratings
The Neptune Range of the Indirect Unvented Hot Water Cylinders are built to work in combination with any external thermostatically controlled heat source. Within this industry leading Hot Water Storage Cylinders is a highly efficient 3kW Immersion Heater
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Indirect Unvented Cylinders
Ranging from 120 to 300 litres capacity, our premium indirect hot water cylinders with outstanding efficiency ratings
The Neptune Range of the Indirect Unvented Hot Water Cylinders are built to work in combination with any external thermostatically controlled heat source. Within this industry leading Hot Water Storage Cylinders is a highly efficient 3kW Immersion Heater
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Neptune Indirect Unvented Cylinders
Ranging from 120 to 300 litres capacity, our premium indirect hot water cylinders with outstanding efficiency ratings
The Neptune Range of the Indirect Unvented Hot Water Cylinders are built to work in combination with any external thermostatically controlled heat source. Within this industry leading Hot Water Storage Cylinders is a highly efficient 3kW Immersion Heater
The Neptune Range is manufactured to the highest standard and offers a high performance to suit your needs. The extensive range is suited to both Domestic and Commercial purposes and comprises of Direct and Indirect models in Standard and Solar configurations. By providing fast, safe, mains pressure hot water around the home these cylinders meet the needs of the builder, installer and consumer.
The Neptune indirect cylinder is suitable for providing hot water with all types of boilers: gas, electric, oil, solid fuel and LPG.
The Neptune Stainless Steel Cylinder provides outstanding levels of comfort and hot water performance. The Neptune Stainless Steel Cylinder is perfect for situations where a large amount of hot water is required for fast filling baths and powerful showers.
As the Neptune Cylinder can be connected directly to the mains cold water supply, hot water is available at all water outlets at mains pressure. The Neptune Cylinder can be located at almost any location within the property without affecting overall product performance. The Neptune Stainless Steel Cylinder requires virtually no maintenance.
Fusion Astro v2 Combination Boiler Instant Hot Water & Heating
Output Range
- 12kW, 14.4kW single phase models
- 24kW, 30kW three phase models
User-Friendly Controls
- Graphical LCD display for easy operation
- Built-in programmer for customized heating schedules
- Can integrate with external smart controls/programmers
Energy-Saving Intelligence
- Weather compensator automatically adjusts output
- Advanced diagnostics for quick troubleshooting
Efficient Performance
- Provides cost-effective heating vs storage/fuel heating
- Ideal for properties off gas grid or with restrictions
- Suited for wet system radiators and underfloor heating
Domestic Hot Water
- Instantaneous hot water for sinks/showers
- For bathtubs, 3 phase, 24/30kW models recommended
- For larger demands, can combine with cylinder (‘S’ plan)
Temperature Adjustment
- Hot water range: 30°C – 60°C
- Heating range: 30°C – 80°C
Installation Benefits
- No flue required for rapid heating/hot water
- Superior inner design for high efficiency
- Available in convenient pre-matched cylinder packages
The enhanced Fusion Astro v2 boiler delivers an intuitive, energy-smart heating and on-demand hot water solution for properties off the gas grid.
Fusion Astro v2 Combination Boiler Instant Hot Water & Heating
Output Range
- 12kW, 14.4kW single phase models
- 24kW, 30kW three phase models
User-Friendly Controls
- Graphical LCD display for easy operation
- Built-in programmer for customized heating schedules
- Can integrate with external smart controls/programmers
Energy-Saving Intelligence
- Weather compensator automatically adjusts output
- Advanced diagnostics for quick troubleshooting
Efficient Performance
- Provides cost-effective heating vs storage/fuel heating
- Ideal for properties off gas grid or with restrictions
- Suited for wet system radiators and underfloor heating
Domestic Hot Water
- Instantaneous hot water for sinks/showers
- For bathtubs, 3 phase, 24/30kW models recommended
- For larger demands, can combine with cylinder (‘S’ plan)
Temperature Adjustment
- Hot water range: 30°C – 60°C
- Heating range: 30°C – 80°C
Installation Benefits
- No flue required for rapid heating/hot water
- Superior inner design for high efficiency
- Available in convenient pre-matched cylinder packages
The enhanced Fusion Astro v2 boiler delivers an intuitive, energy-smart heating and on-demand hot water solution for properties off the gas grid.
Fusion Astro v2 Combination Boiler Instant Hot Water & Heating
Output Range
- 12kW, 14.4kW single phase models
- 24kW, 30kW three phase models
User-Friendly Controls
- Graphical LCD display for easy operation
- Built-in programmer for customized heating schedules
- Can integrate with external smart controls/programmers
Energy-Saving Intelligence
- Weather compensator automatically adjusts output
- Advanced diagnostics for quick troubleshooting
Efficient Performance
- Provides cost-effective heating vs storage/fuel heating
- Ideal for properties off gas grid or with restrictions
- Suited for wet system radiators and underfloor heating
Domestic Hot Water
- Instantaneous hot water for sinks/showers
- For bathtubs, 3 phase, 24/30kW models recommended
- For larger demands, can combine with cylinder (‘S’ plan)
Temperature Adjustment
- Hot water range: 30°C – 60°C
- Heating range: 30°C – 80°C
Installation Benefits
- No flue required for rapid heating/hot water
- Superior inner design for high efficiency
- Available in convenient pre-matched cylinder packages
The enhanced Fusion Astro v2 boiler delivers an intuitive, energy-smart heating and on-demand hot water solution for properties off the gas grid.
Component Packages that incorporate all the necessary components needed to meet Part L of the Building Regulations and ensure a high quality system install. The value-for-money Heating and Domestic Hot Water solutions are designed with the busy installer in mind
This Pack includes all the key components required to ensure a hassle free & professional install of the Astro Combi Boiler.
Pack Contents includes the following:
- 1x Single Channel Programmer (EC10001)
- 1x Wireless Room Thermostat (EC10015)
- 1x Filling Loop (CB92)
- 1x Flow Restrictor (5L=12kw, 6L="14kw," 8L="18kw," 12L="24kw)
- 2x 3/4F X 22MM ANG VALVE BLACK HANDLE (CB153)
- 2x 1/2F X 15MM ANG VALVE BLACK HANDLE (CB154)
- 1x MagnaClean Pro 2 Filter
- 1x Adey MC1+ Inhibitor (CB157)
- 1x Adey MC3 System Cleaner (CB156)
Astro Combi Boiler Valve Kit
The Comet PV Electric System Boiler. Available in three models with a range of outputs from 2kW to 24kW, each configurable on-site for optimal performance.
The Comet PV is engineered as a standard Electric System Boiler but also for direct compatibility with the solar panels on your roof, ushering in an era of energy efficiency and environmental responsibility. When you connect your solar panels with the Comet PV Electric System Boiler, you’re bringing together smart design and environmentally friendly heating.
- Seamless integration with solar panels to maximise energy produced from PV
- App-controlled functionality for remote management of heating schedules, temperature and energy consumption
- Energy efficient and eco-conscious approach to home heating
- Weather compensation compatibility for optimal performance
- Consistent and efficient heating while contributing to sustainable energy practices
- Manages three distinct heating circuits at different temperatures i.e. underfloor heating, wet radiators, and warm air unit
- Significant step toward a greener and more efficient future in home heating technology.
Imagine a world where the surplus energy generated by your solar panels isn’t lost to the grid but rather harnessed intelligently.
With Comet PV, this becomes a reality as it actively prevents wastage by integrating with your solar setup. This synergy ensures that every ray of sunlight captured by your panels contributes significantly to your home’s heating needs. It’s not just a boiler; it’s a catalyst for a more sustainable and cost-effective lifestyle.
When you connect your solar panels with the Comet PV Electric Boiler, you’re bringing together smart design and environmentally friendly heating. We are reshaping the future of home comfort and environmental consciousness , one solar-powered warmth at a time.
By accommodating multiple heating circuits, the Comet PV ensures that different circuits of your home receive precisely the warmth they need.
Whether it’s your underfloor heating operating at 45 degrees, your radiators operating at 65 degrees, or warm air unit at 80 degrees, this boiler provides a personalised heating experience for every set-up.
The Comet PV Electric System Boiler. Available in three models with a range of outputs from 2kW to 24kW, each configurable on-site for optimal performance. 3Phase Supply Required
The Comet PV is engineered as a standard Electric System Boiler but also for direct compatibility with the solar panels on your roof, ushering in an era of energy efficiency and environmental responsibility. When you connect your solar panels with the Comet PV Electric System Boiler, you’re bringing together smart design and environmentally friendly heating.
- Seamless integration with solar panels to maximise energy produced from PV
- App-controlled functionality for remote management of heating schedules, temperature and energy consumption
- Energy efficient and eco-conscious approach to home heating
- Weather compensation compatibility for optimal performance
- Consistent and efficient heating while contributing to sustainable energy practices
- Manages three distinct heating circuits at different temperatures i.e. underfloor heating, wet radiators, and warm air unit
- Significant step toward a greener and more efficient future in home heating technology.
Imagine a world where the surplus energy generated by your solar panels isn’t lost to the grid but rather harnessed intelligently.
With Comet PV, this becomes a reality as it actively prevents wastage by integrating with your solar setup. This synergy ensures that every ray of sunlight captured by your panels contributes significantly to your home’s heating needs. It’s not just a boiler; it’s a catalyst for a more sustainable and cost-effective lifestyle.
When you connect your solar panels with the Comet PV Electric Boiler, you’re bringing together smart design and environmentally friendly heating. We are reshaping the future of home comfort and environmental consciousness , one solar-powered warmth at a time.
By accommodating multiple heating circuits, the Comet PV ensures that different circuits of your home receive precisely the warmth they need.
Whether it’s your underfloor heating operating at 45 degrees, your radiators operating at 65 degrees, or warm air unit at 80 degrees, this boiler provides a personalised heating experience for every set-up.
The Comet PV Electric System Boiler. Available in three models with a range of outputs from 2kW to 24kW, each configurable on-site for optimal performance. 3Phase Supply Required
The Comet PV is engineered as a standard Electric System Boiler but also for direct compatibility with the solar panels on your roof, ushering in an era of energy efficiency and environmental responsibility. When you connect your solar panels with the Comet PV Electric System Boiler, you’re bringing together smart design and environmentally friendly heating.
- Seamless integration with solar panels to maximise energy produced from PV
- App-controlled functionality for remote management of heating schedules, temperature and energy consumption
- Energy efficient and eco-conscious approach to home heating
- Weather compensation compatibility for optimal performance
- Consistent and efficient heating while contributing to sustainable energy practices
- Manages three distinct heating circuits at different temperatures i.e. underfloor heating, wet radiators, and warm air unit
- Significant step toward a greener and more efficient future in home heating technology.
Imagine a world where the surplus energy generated by your solar panels isn’t lost to the grid but rather harnessed intelligently.
With Comet PV, this becomes a reality as it actively prevents wastage by integrating with your solar setup. This synergy ensures that every ray of sunlight captured by your panels contributes significantly to your home’s heating needs. It’s not just a boiler; it’s a catalyst for a more sustainable and cost-effective lifestyle.
When you connect your solar panels with the Comet PV Electric Boiler, you’re bringing together smart design and environmentally friendly heating. We are reshaping the future of home comfort and environmental consciousness , one solar-powered warmth at a time.
By accommodating multiple heating circuits, the Comet PV ensures that different circuits of your home receive precisely the warmth they need.
Whether it’s your underfloor heating operating at 45 degrees, your radiators operating at 65 degrees, or warm air unit at 80 degrees, this boiler provides a personalised heating experience for every set-up.
With a simple tap on your smartphone, you gain full remote control and access* to preview and adjust the operation of your Comet PV Electric System Boiler. Take charge of your heating schedule with the app’s remote-control capabilities. Monitor energy consumption, set personalised temperature settings for different times of the day, create a daily & weekly schedule tailored to your lifestyle, and enjoy the comfort of returning to a perfectly heated home. Our app puts the power in your hands, allowing you to configure your heating system’s operation with ease.
The user-friendly interface ensures a hassle-free experience. Stay connected and in control, whether you’re in the next room or miles away. Embrace the future of home heating technology with our App. Unlock a new level of convenience, comfort, and energy efficiency for your home. With our app, your heating system is always at your fingertips.
This Pack includes all the key components required to ensure a hassle free & professional install of the Comet Combi Boiler.
Pack Contents includes the following:
- 1x Wireless Room Thermostat (EC10015)
- 1x Filling Loop (CB92)
- 1x MagnaClean Pro 2
- 1x Adey MC1+ Inhibitor (CB157)
- 1x Adey MC3 System Cleaner (CB156)
Electric Combi Boilers All-in-One Heating & Hot Water Solution
Output Range Available in 9kW, 12kW or 14.4kW models to suit property requirements.
Integrated 144L Tank 140 litre duplex stainless steel insulated hot water cylinder built-in.
Space-Saving Design
Compact, elegant enclosure maximizes space while minimizing installation work.
Pre-Plumbed & Pre-Wired Supplied for easy installation.
User-Friendly Controls
- Built-in programmer for customized heating schedules
- Wired room sensor for temperature control
- Option for heating only, hot water only, or both
Fast Hot Water Recovery with an indirect integrated cylinder, hot water reheat times are superior to direct cylinder units.
Energy Efficient Intelligent controls allow selecting only heating or hot water as needed to reduce energy usage.
Instant Heating & Hot Water The combination design provides on-demand wet central heating and domestic hot water.
No Gas Required Ideal solution for properties with no access to mains gas supply.
Upgrade to the ultimate convenience of hot water and high-efficiency wet heating with EHC’s all-in-one electric combi boiler units.
Electric Combi Boilers All-in-One Heating & Hot Water Solution
Output Range Available in 9kW, 12kW or 14.4kW models to suit property requirements.
Integrated 144L Tank 140 litre duplex stainless steel insulated hot water cylinder built-in.
Space-Saving Design
Compact, elegant enclosure maximizes space while minimizing installation work.
Pre-Plumbed & Pre-Wired Supplied for easy installation.
User-Friendly Controls
- Built-in programmer for customized heating schedules
- Wired room sensor for temperature control
- Option for heating only, hot water only, or both
Fast Hot Water Recovery with an indirect integrated cylinder, hot water reheat times are superior to direct cylinder units.
Energy Efficient Intelligent controls allow selecting only heating or hot water as needed to reduce energy usage.
Instant Heating & Hot Water The combination design provides on-demand wet central heating and domestic hot water.
No Gas Required Ideal solution for properties with no access to mains gas supply.
Upgrade to the ultimate convenience of hot water and high-efficiency wet heating with EHC’s all-in-one electric combi boiler units.
Electric Combi Boilers All-in-One Heating & Hot Water Solution
Output Range Available in 9kW, 12kW or 14.4kW models to suit property requirements.
Integrated 144L Tank 140 litre duplex stainless steel insulated hot water cylinder built-in.
Space-Saving Design
Compact, elegant enclosure maximizes space while minimizing installation work.
Pre-Plumbed & Pre-Wired Supplied for easy installation.
User-Friendly Controls
- Built-in programmer for customized heating schedules
- Wired room sensor for temperature control
- Option for heating only, hot water only, or both
Fast Hot Water Recovery with an indirect integrated cylinder, hot water reheat times are superior to direct cylinder units.
Energy Efficient Intelligent controls allow selecting only heating or hot water as needed to reduce energy usage.
Instant Heating & Hot Water The combination design provides on-demand wet central heating and domestic hot water.
No Gas Required Ideal solution for properties with no access to mains gas supply.
Upgrade to the ultimate convenience of hot water and high-efficiency wet heating with EHC’s all-in-one electric combi boiler units.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.
These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.
These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.
These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.
These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.
These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.
These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.
These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.
These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.
These very popular Boiler & Cylinder Heatpacks ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.
These very popular Boiler & Cylinder Heatpacks ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.
These very popular Boiler & Cylinder Heatpacks ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.
These very popular Boiler & Cylinder Heatpacks ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.
These very popular Boiler & Cylinder Heatpacks ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.
These very popular Boiler & Cylinder Heatpacks ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.
These very popular Boiler & Cylinder Heatpacks ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.
These very popular Boiler & Cylinder Heatpacks ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.
For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.
For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.
For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.
Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.
When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.
