Comet & Slimjim Electric Boiler Packages

EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.

These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.

These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.

These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.

These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.

These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.

These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.

These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Direct Cylinders with their range of Comet PV Electric Flow Boilers. The Direct Stainless Steel Unvented Cylinders incorporate a combination valve, temperature and pressure relief valve, DHW expansion vessel, tundish and 2 x 3kW Immersion Elements.

These very popular Boiler & Cylinder Heat Packs ensure that all your heating and hot water appliances carry the renowned EHC Brand which simplifies any future warranty support and provides complete peace of mind.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.

EHC Electric Boiler & Cylinder Packages to reduce installation time by offering Indirect Cylinders with their range of Comet Electric System Boilers. The Indirect Stainless Steel Unvented Cylinders incorporate a combination valve, dual thermostat, temperature and pressure relief valve, tundish and high efficiency circulating pump which is included within the Boiler. Also included is 2×2 port zone valves and a wiring centre.

EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 7kW SlimJim Electric Boiler and a 120L Direct Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 7kW to 14.4kW with a choice of Direct Stainless Steel Cylinders from 120L to 180L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 7kW, 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 7kW SlimJim Electric Boiler and a 120L Direct Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 7kW to 14.4kW with a choice of Direct Stainless Steel Cylinders from 120L to 180L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 7kW, 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 7kW SlimJim Electric Boiler and a 120L Direct Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 7kW to 14.4kW with a choice of Direct Stainless Steel Cylinders from 120L to 180L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 7kW, 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 7kW SlimJim Electric Boiler and a 120L Direct Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 7kW to 14.4kW with a choice of Direct Stainless Steel Cylinders from 120L to 180L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 7kW, 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 7kW SlimJim Electric Boiler and a 120L Direct Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 7kW to 14.4kW with a choice of Direct Stainless Steel Cylinders from 120L to 180L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 7kW, 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 7kW SlimJim Electric Boiler and a 120L Direct Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 7kW to 14.4kW with a choice of Direct Stainless Steel Cylinders from 120L to 180L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 7kW, 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 7kW SlimJim Electric Boiler and a 120L Direct Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 7kW to 14.4kW with a choice of Direct Stainless Steel Cylinders from 120L to 180L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 7kW, 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 10kW SlimJim Electric Boiler and an 150L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 10kW SlimJim Electric Boiler and an 150L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 10kW SlimJim Electric Boiler and an 150L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 10kW SlimJim Electric Boiler and an 150L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 10kW SlimJim Electric Boiler and an 150L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 10kW SlimJim Electric Boiler and an 150L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 10kW SlimJim Electric Boiler and an 150L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 10kW SlimJim Electric Boiler and an 150L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.